21 Nov 2009 
Support Center » Knowledgebase » Modules and Phone Power Requirements
 Login [Lost Password] 
Email:
Password:
Remember Me:
 
 Search
 Article Options
 Add Comment
 Print Article
 PDF Version
 Email Article
 Add to Favorites
 Modules and Phone Power Requirements
Solution

Splicecom Maximiser Power requirements and Descriptions

Technical Data
Approval
These products are CE compliant according to the European Directives for
Telecommunications, Safety and EMC.
Safety Caution
The telephone ports on the Phone43xx, Remote Call Server, 5100, 5108, 5315 and 5330 are
classified as TNV-2 ports. These ports may generate voltages exceeding normal safe (SELV)
limits, e.g. when ringing. Care should be exercised when using these ports (avoid touching the
contacts) and only TNV-2 or TNV-3 compliant devices may be attached.
The ISDN ports on the CallServer, Trunk, Remote Call Server, 5100 and 5108 units are classified
as TNV-1 ports. This means that the connecting device (e.g. ISDN line from the telephone
company) normally operates within safe limits but can on occasion have high Voltage transients.
The unit will not be harmed by these transients but care should be exercised when handling the
cable connected to the telephone company’s NTU, i.e. avoid touching the cable contacts.
All other ports operate within safe (SELV) limits. For continued safe operation these ports may
only be connected to other SELV ports.
EMC Caution
Warnings
These products are Class A. In a domestic environment these products may cause radio
interference in which case the user may be required to take adequate measures.
General
Module Dimensions (mm) : 487(w) x 224(d) x 43(h)
5100 Call Server Weight (kg) : 3.5
5108 Call Server Weight (kg) : 1.7
5315 Phone module Weight (kg) : 3.3
5330 Phone module Weight (kg) : 3.3
4100 Call Server Weight (Kg) : 3.6
4200 Trunk module Weight (Kg) : 3.4
43xx Phone module Weight (Kg) : 3.5
4140 Remote Call Server Weight (Kg) : 3.7
4400 Voice Compression module Weight (Kg) : 3.4
Environmental : 0 to 40°C
85% Relative Humidity, non condensing
AC power supplies
The lump in line PSUs used with the products operate from a 230Vac 50Hz mains supply.
- 290 - Installation & Reference Manual
Technical Data
5 Series/V3.2/0907/2 - 290 - Technical Data
Installation and Reference Manual
Port Definitions
Call Server 5100
DC Power Inlet : 2.5mm jack socket for 48V, 1.35A power supply.
POTS ports (16) : Telephone ports – see safety statement concerning TNV-2.
: Off hook voltage = 48V
: Ringing Voltage = 44Vrms
: Loop current = 25mA
LAN ports (4) : 10/100BaseT Full Duplex, Auto MDI/MDI-X LAN ports.
: These ports may also provide power over LAN to IEEE 802.3af
compliant attached devices.
LAN LINK port : 10/100BaseT Full Duplex, Auto MDI/MDI-X LAN port.
BRI ports (4) : Basic rate ISDN ports meeting CTR3 – see safety statement.
PRI ports (2) : Primary rate ISDN ports meeting CTR4 – see safety statement.
Event inputs (2) : Opto-coupled inputs to trigger events – see text for details.
Relay outputs (2) : Opto-coupled outputs to control external devices – see text for details.
USB Host Interface : USB 2 (High/Full and Low speeds)
Phone 53xx
DC Power Inlet : 2.5mm jack socket for 48V, 1.35A power supply.
POTS ports (xx) : Telephone ports – see safety statement concerning TNV-2.
: Off hook voltage = 48V
: Ringing Voltage = 44Vrms
: Loop current = 25mA
LAN ports (4) : 10/100BaseT Full Duplex, Auto MDI/MDI-X LAN ports.
: These ports may also provide power over LAN to IEEE 802.3af
compliant attached devices.
LAN LINK port : 10/100BaseT Full Duplex, Auto MDI/MDI-X LAN port.
Event inputs (2) : Opto-coupled inputs to trigger events – see text for details.
Relay outputs (2) : Opto-coupled outputs to control external devices – see text for details.
USB Host Interface : USB 2 (High/Full and Low speeds)
Call Server 5108
DC Power Inlet : 2.5mm jack socket for 48V, 1.35A power supply.
POTS ports (4) : Telephone ports – see safety statement concerning TNV-2.
: Off hook voltage = 48V
: Ringing Voltage = 44Vrms
: Loop current = 25mA
LAN ports (4) : 10/100BaseT Full Duplex, Auto MDI/MDI-X LAN ports.
: These ports may also provide power over LAN to IEEE 802.3af
compliant attached devices.
LAN LINK port : 10/100BaseT Full Duplex, Auto MDI/MDI-X LAN port.
BRI ports (2) : Basic rate ISDN ports meeting CTR3 – see safety statement.
Event input : Opto-coupled input to trigger events – see text for details.
Relay output : Opto-coupled output to control external devices – see text for details.
4100 Call Server/4200 Trunk
DC Power Inlet : 2.5mm jack socket for 48V, 1A power supply.
DC Power over LAN : 5 pin DIN socket for 48V, 2.7A power supply.
- 291 - Installation & Reference Manual
Technical Data
5 Series/V3.2/0907/2 - 291 - Technical Data
Installation and Reference Manual
LAN ports (front) : 10/100BaseT Full Duplex, Auto MDI/MDI-X LAN ports.
: These ports may also provide power over LAN to IEEE 802.3af
compliant attached devices.
LAN port (back) : 10/100BaseT Full Duplex, MDI LAN port. (Call Server only)
BRI ports : Basic rate ISDN ports meeting CTR3 – see safety statement.
PRI port : Primary rate ISDN port meeting CTR4 – see safety statement.
WAN port : V.11 (X.21) WAN interface operating up to 2.048Mb/s.
Event inputs : Opto-coupled inputs to trigger events – see text for details.
Relay outputs : Opto-coupled outputs to control external devices – see text for details.
Phone 43xx
DC Power Inlet : 2.5mm jack socket for 48V, 1A power supply.
PCMCIA : Support for 5V and dual voltage 5V/3.3V cards. Support is also
dependent on available s/w drivers.
LAN port : 10/100BaseT Full Duplex, MDI LAN port.
POTS ports : Telephone ports – see safety statement concerning TNV-2.
: Off hook voltage = 48V
: Ringing Voltage = 44Vrms
: Loop current = 25mA
4140 Remote Call Server
DC Power Inlet : 2.5mm jack socket for 48V, 1A power supply.
LAN port (back) : 10/100BaseT Full Duplex, MDI LAN port.
BRI ports : Basic rate ISDN ports meeting CTR3 – see safety statement.
PRI port : Primary rate ISDN port meeting CTR4 – see safety statement.
WAN port : V.11 (X.21) WAN interface operating up to 2.048Mb/s.
Event inputs : Opto-coupled inputs to trigger events – see text for details.
Relay outputs : Opto-coupled outputs to control external devices – see text for details.
POTS ports : Telephone ports – see safety statement concerning TNV-2.
: Off hook voltage = 48V
: Ringing Voltage = 44Vrms
4400 Voice Compression Module
DC Power Inlet : 2.5mm jack socket for 48V, 1A power supply.
LAN port : 10/100BaseT Full Duplex, MDI LAN port.
Cable Specifications
Warning: The products are not designed to directly connect to cables that are routed external
to a building.
RJ45 connections
The RJ45 ports on the units (i.e. ISDN ports and LAN ports) are connected to other devices
using standard category 5 UTP patch cables. These may be supplied with the units but are also
commercially available from numerous retail outlets.


Voice2Voice Technical Team

Article Details
Article ID: 15
Created On: 05 Apr 2008 03:27 PM

 This answer was helpful  This answer was not helpful

 User Comments Add a Comment
 Back
Home | Register | Submit a Ticket | Knowledgebase | Troubleshooter | News | Downloads
Language: